WCA-SMART - Automatic Turntable

>> Request a Quote <<

WCA-SMART - Automatic Turntable

The WCA-SMART model, a heavy duty automatic conveyorized turntable as the ideal stretch wrapping solution for your unique needs

  • 4,000 lbs load weight capacity (optional 6000 lbs)
  • The control panel is UL508A approved
  • 100% structural steel construction
  • 25" ring GEAR w/ pinion gear drive
  • Superior Electrical/Electronic design including Allen Bradley MicroLogix 1400 PLC with an integrated Ethernet port.
  • Wulftec's exclusive 20" NO-THREAD® Powered Pre-Stretch Carriage (30" optional)
  • Readily available non-proprietary parts
  • Allen Bradley Monochrome Touch Screen – play an active part in avoiding operator errors by offering a great versatility for customized information and alarm diagnostic
Production Rate
  • 70 loads per hour
Machine Dimensions
  • 135" L x
  • 199" W x
  • 100" H
Maximum Load Size
  • 48" L x
  • 48" W x
  • 80" H
Load Weight
  • 4000 lbs
Approximate Shipping Weight
  • 4750 lbs
Electrical Requirements
  • 230 V /
  • 2 ph /
  • 60Hz
  • 20A
Pneumatic Requirements
  • 3 cfm @
  • 80 psi
Controls
  • 24V control system
  • Allen Bradley MicroLogix 1400 PLC with an integrated Ethernet port
  • Allen Bradley PanelView Plus 600 monochrome Touch Screen Interface
  • Sick autoheight sensing photoeye with on/off mode
  • On Stand NEMA 4/12 control cabinet
  • Power on/off lockable switch and indicator light
  • One panel mounted emergency stop station
  • Manual carriage Up/down function
  • Manual function for turntable rotation fwd
  • Manual clamp jog on touch screen
  • Reset function
  • Separate top and bottom wrap selection (0-9)
  • Single carriage speed
  • Conveyor jog fwd
  • (Fwd / rev optional*)
  • Alarm beacon
  • Intuitive alarms diagnostic on touch screen
  • Current overload protection
  • Double brush dust tight slip ring
  • 230VAC motors & variable frequency drives with contactor driven conveyors
  • Film force to load control
Structure
  • 14 gauge formed steel tower
  • Heavy duty structural steel construction
Film Delivery System
  • 20" NO-THREAD® Powered Pre-Stretch Carriage
  • 1 HP 230VAC motor with Allen Bradley variable frequency drive
  • Lifetime warranty on pre-stretch rollers blue compound
  • Film force release for easy pull at start and end of cycle
  • 50% to 300% prestretch ratio preset to customer spec, std 200%
  • Sensing device for film out/broken with visual alarm
  • Electronic film tension control with analog sensor
  • Film roping bar
  • Lexan roller cover for operator safety
  • Proximity sensor on carriage gate to ensure gate is properly closed
Film Tail Treatment
  • Automated Cut/Clamp & Wipe system
  • Pulse controlled cutter
  • Film alignment arm & brush on film tail treatment
  • Brush-on film tail treatment
  • (Heat Seal treatment*)
Film Carriage Drive
  • 1 HP 230VAC motor with Allen Bradley variable frequency drive
  • Two #40 carriage lifting chains
  • Bearing supported maintenance free guide wheels
Turntable conveyor
  • 25" Heavy duty ring gear with pinion gear drive
  • Max 16 RPM variable speed
  • 1 HP 230VAC motor with Allen Bradley variable frequency drive
  • Electronic soft start/stop
  • Positive turntable alignment controlled by proximity sensor
  • Electric brake
Turntable conveyor
  • 77" dia. 1/2" steel plate
  • 2 1/2" dia. Rollers on 3 3/8" centers
  • All full length rollers driven
  • 3/16" wall cold rolled electric welded steel rollers
  • 52" BFR (between frame rails)
  • 1 HP AC motor with contactor
  • #40 ANSI chain drive
  • Heavy duty cast iron flange mounted bearing
Conveyors
  • 5' in / 5' out contoured powered conveyor with smooth transfer
  • Standard 52" BFR (between frame rails)
  • Standard pass height 18"
  • (Other pass heights available, please consult factory*)
  • 2 1/2" diameter rollers on 3 3/8" centers
  • 3/16" walls cold rolled electric welded steel rollers
  • Rollers driven via #40 chain
  • 1 HP 230VAC motor and contactor
  • Heavy-duty structural steel design, interlocking style for continuous equal roller spacing
  • Heavy-duty cast iron flange mounted bearings
  • 30 FPM fix conveyor speed
  • (Other speeds available*)
Technical Information
  • The machine is provided with a manual including electro/mechanical schematics and drawings, maintenance program and PLC program disk
Notes:
  • Optional
  • Production rate based on load configuration and machine options
  • Overall dimensions of machine in operation
  • All machine specifications are subject to change without prior notice
  • Please consult your distributor for prices.
  • Please note that retrofits are to be installed by a Certified Wulftec Technician.
  • Control cabinet

    Recommended for you
    Follow us
    Share with your friends
    1 877 WULFTEC (1 877 985-3832)
    Wulftec International Inc. : 209 Wulftec, Ayer’s Cliff, Quebec, Canada J0B 1C0
    Phone: 819 838-4232 | Toll Free: 1 877 WULFTEC (985-3832) | Fax: 819 838-5539
    Google+